features plastic case with heatsink for heat dissipation surge overload -240~400 amperes peak flammability classification 94v-0 mechanical data case:molded plastic with heatsink integrally mounted in the bridge encapsulation weight:1 ounce,30 grams. mounting position: any terminals:wire lead 50 mils. dimensions in inches and (millimeters) maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave ,60hz, resistive or inductive load. for capacitive load, derate current by 20% br br br br br br br 1005l 101l 102l 104l 106l 108l 1010l 1505l 151l 152l 154l 156l 158l 1510l 2505l 251l 252l 254l 256l 258l 2510l 3505l 351l 352l 354l 356l 358l 3510l maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms bridge input voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward current for resistive load @t c =55 peak forward surge current 8.3ms single half sine-wave super imposed on rated load maximum forward voltage per bridge element at 5.0/7.5/12.5/17.5a peak maximum reverse current at rate @t j =25 dc blocking voltage @t j =100 i 2 t rating for fusing (t<8.3ms) i 2 t a 2 s typical thermal resistance r jc /w operating temperature range t j storage temperature range t stg notes:1.the typical data above is for reference only( ?). rev. 7, 16-mar-2017 the plastic package has ul unit br-l 10a/15a/25a/35a series silicon bridge rectifiers reverse voltage - 50 to 1000 volts forward current - 10/15/25/35 amperes v f 1.1 v characteristics symbol a i fsm a i (av) a -55 to +150 -55 to +150 239/374/664 2.0 10 1000 i r br-l br 10l 10 15 25 35 240 300 400 400 br 15l br 25l br 35l .180(4.6) .220(5.6) .048(1.2)typ. .052(1.3)dia. .140(3.6) .120(3.05) (13.9) .550 min. min. .750 (19.0) .442(11.23) .424(10.77) 1.114(28.3) 1.133(28.8) metal heat sink
rating and characteristic curves the cruve graph is for reference only, can't be the basis for judgment( ? br-l10/15/25/35a series percent of rated peak reverse voltage instantaneous reverse current, microamperes fig.4-typical reverse characteristics 10 1.0 0.1 0.01 0 120 20 40 60 80 100 140 t j =25c fig.2-derating curve output rectified current average forward output current amperes 40 30 20 10 0 50 100 150 br35l br25l br15l br10l case temperature,
legal disclaimer notice all specifications and data are subject to be changed without notice to improve reliability function or design or other reasons. hy makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co- tinuing production of any product. to the maximum extent permitted by applicable law, hy disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d- amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch- antability. statements regarding the suitability of products for certain types of applications are based on hy?s knowledge of typical require- ments that are often placed on hy products in generic applications. such statements are not binding statements about the suitabi- lity of products for a particular application. it is the customer?s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application.parameters provided in datasheets and specific- ations may vary in different applications and performance may vary over time. all operating parameters, including typical paramet- ers, must be validated for each customer application by the customer?s technical experts. product specifications do not expand or otherwise modify hy?s terms and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, hy products are not designed for use in medical, life-saving, or life-sustaining applicati- ons or for any other applications in which the failure of the hy product could result in personal injury or death. customers using or selling hy products not expressly indicated for use in such applications do so at their own risk.please contact authorized hy pers- onnel to obtain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of hy. product names and markings noted herein may be trademarks of their respective owners. ?????????? hy ???????????hy (i) ? ??????(ii) ???????(iii) ??? ???????? ????? hy ? hy ???????????? ???????????????? ????? ????????????? ??? hy ???? hy ???? ?hy ????? hy ??????? ?????? hy ????????hy ?? ? ? hy ??????????????????? ??? rev. 2, 16-mar-2017 disclaimer
|
